Automobiles and motorcycles

Inside door handle / case

・Achieves the UV resistance and chemical resistance required for automobile interior parts without painting.
・Changes in the mechanical properties and color tone due to heat aging and UV irradiation have cleared the standards of each OEM.
・It complies with OEM in-vehicle environmental standards (reduction of volatile components), which are becoming stricter year by year.

Products

TENAC™

Grades

TENAC™-C Z4513:Medium viscosity, low formaldehyde emisson, UV resistant copolymer grade
TENAC™-C ZM413:Medium viscosity, low formaldehyde emisson , UV resistant, metallic appearance copolymer grade

Features

・Low VOC (Volatile Organic Compound) property of the highest level in the industry.
・Excellent UV resistance.
・The metallic appearance grade enables high designed product surface without painting.

Rear view mirror bracket

Bracket holding the mirror to check the rear view

roommirror

Products

LEONA™

Grades

SG104SG105
High stiffness, good appearance, and easy moldability

Features

・Vibration reduction due to high stiffness
・Appearance as an interior part

Through anchor

The through anchor is installed on the center pillar, and the metal parts are coverd with POM resin to maintain the slidability with the seat belt made from polyester.
In addition, high-viscosity UV-resistant homopolymer grade 3013A is used because it is required to have impact resistance in the automobile crash and UV resistance because it is an interior part.

Products

TENAC™

Grades

TENAC™ 3013A:Ultra-high viscosity UV resistant homopolymer grade

Features

・UV resistance
・Excellent imapct strength.

Seat-belt press button

・It has the high UV resistance and low formaldehyde emisson properties required for automobile interior parts.
・It has excellent impact strength and is not easily damaged even in an emergency.

Products

TENAC™

Features

・Industry's highest level of low VOC (volatile organic compound) performance
・UV resistance
・Impact strength

Motor gear

Since the gears used in the motors that window lifters, wipers, seats, etc. are required to have high durability, high-viscosity homopolymers are mainly used.

Products

TENAC™

Grades

TENAC™ MG210 : Ultra-high viscosity and high durability homopolymer grade

Features

・Excellent durability.
・Excellent creep property.
・Weight reduction is possible by replacing metal with POM resin.