ISO indication of grade

Category Item TENAC™ TENAC™-C
Grade ISO Grade ISO
Non reinforced Standard Low
Viscosity
Super HighFlowability 9054 >POM< 8520 >POM<
9520 >POM<
HighFlowability 7010 >POM< 7520 >POM<
HC750 >POM<
Medium
Viscosity
5010 >POM< 5520 >POM<
4010 >POM< 4520 >POM<
HC550 >POM<
4060 >POM< HC450 >POM<
High
Viscosity
3010 >POM< 3510 >POM<
2010 >POM< HC350 >POM<
Function High-Cycle 9054 >POM<
7054 >POM<
7050 >POM<
5050 >POM<
High-Durability 4050 >POM<
MG210 >POM<
Lubrication/Sliding property
(Friction resistance/Abrasion)
LT802 >POM< LT350 >POM<
LT804 >POM< LX750 >POM<
LT200 >POM< LZ750 >POM-SI<
FS410 >POM-PTFE<
LP402 >POM<
LA543 >POM<
LM511 >POM<
LS701 >POM-SI<
LL700 >POM<
Weather-resistant 2013A >POM< 3513 >POM<
3013A >POM< 4513 >POM<
4013A >POM< 4563 >POM<
5013A >POM< 7513 >POM<
Impact resistance/Soft 4012 >POM<
Reinforced Function Friction resistance/Abrasion resistance FS410 >POM-PTFE10< LD755 >POM-MD20<
Low warpage MT754 >POM-MD20<
NS556 >POM-MD30<
High stiffness GF reinforced GN705 >POM-GF25< GN455 >POM-GF25<
GA510 >POM-GF10< GN755 >POM-GF25<
GA520 >POM-GF20<
CF reinforced CF452 >POM-CF10<
CF454 >POM-CF20<
Low-VOC Z3010 >POM< Z3510 >POM<
Z4060 >POM< Z3513 >POM<
Z4513 >POM<
Z4520 >POM<
Z4563 >POM<
ZH450 >POM<
ZH760 >POM<
ZLV40 >POM-SI<
ZM413 >POM<
Anti-Scratch HC460 >POM<
HC760 >POM<
Lubricant LV450 >POM-SI<
LZ750 >POM-SI<
Antistatic properties (Conductivity) TFC64 >POM-CD<
TFC84 >POM-CD<
TFC77 >POM-CD<
EF750 >POM-CD<
EF750 >POM-CD<

ISO labeling of grades is based on the following standards.
ISO 1043-1:2001, ISO 1043-2:2000, ISO 1043-3:1996, ISO 1043-4:1998, ISO 11469:2000

TENAC™

Asahi Kasei started the production and sales of TENAC™ homopolymers in 1972, followed by copolymers in 1985, and the world-first polyacetal block copolymers TENAC™ LA series in 1987.
The company started production and sales of copolymers in Zhangjiagang, China since 2004 in addition to the plant in Japan.
In the polyacetal business field, Asahi Kasei is the world's only manufacturer of both homopolymers (TENAC™) and copolymers (TENAC™ -C), as well as for the block copolymers "TENAC™ LA series" with its own unique technologies.

LEONA™

The Asahi Kasei LEONA™ grades are molding compounds based on PA66, PA612 and semi-aromatic polyamides such as PA66/6I. The range is available in unfilled grades as well as reinforced with glass fibers and special composites. LEONA™ is noted for its high strength, heat, oil, and abrasion resistance as well as for its processability.

Asahi kasei has long experience on the polyamide market since 1972, and is fully able to produce PA66 completely from monomer to compound. Our compounding technologies allow for global quality with local production.

XYRON™

Asahi Kasei started the production and sales of XYRON™ in March 1979. XYRON™ consists of various portfolio that enables the selection of various PPE alloy combinations with other resins such as polystyrene (PS), polyamide (PA), polypropylene (PP), polyphenylene sulfide (PPS) .

TENAC™

Asahi Kasei started the production and sales of TENAC™ homopolymers in 1972, followed by copolymers in 1985, and the world-first polyacetal block copolymers TENAC™ LA series in 1987.
The company started production and sales of copolymers in Zhangjiagang, China since 2004 in addition to the plant in Japan.
In the polyacetal business field, Asahi Kasei is the world's only manufacturer of both homopolymers (TENAC™) and copolymers (TENAC™ -C), as well as for the block copolymers "TENAC™ LA series" with its own unique technologies.

LEONA™

The Asahi Kasei LEONA™ grades are molding compounds based on PA66, PA612 and semi-aromatic polyamides such as PA66/6I. The range is available in unfilled grades as well as reinforced with glass fibers and special composites. LEONA™ is noted for its high strength, heat, oil, and abrasion resistance as well as for its processability.

Asahi kasei has long experience on the polyamide market since 1972, and is fully able to produce PA66 completely from monomer to compound. Our compounding technologies allow for global quality with local production.

XYRON™

Asahi Kasei started the production and sales of XYRON™ in March 1979. XYRON™ consists of various portfolio that enables the selection of various PPE alloy combinations with other resins such as polystyrene (PS), polyamide (PA), polypropylene (PP), polyphenylene sulfide (PPS) .