Fuel cell
Components for fuel cells
Products XYRON™
- TOP
- Application cases
- Industrial machinery
Industrial machinery
Fuel cell
Components for fuel cells
Products
Grades
500H
・Non-reinforced heat resistant grade
・Low elution performance
・Acid resistance
Features
・Low elution from resin (ions, oligomers, and etc.) to water
which is highly evaluated by customers.
・Excellent hot water resistance and acid resistance, and physical properties hardly deteriorate even when components are immersed for a long period of time.
Magnet switch
A switch that opens and closes electrical contacts using an electromagnet
Products LEONA™
Magnet switch
A switch that opens and closes electrical contacts using an electromagnet
Products
Grades
・SN series, FG series: Glass fiber reinforced, UL94: V-0
・SN series: GF reinforced non-halogenated flame retardancy
・FG series: GF reinforced flame retardancy
Features
・Excellent laser printability
・Moldability
・Wear resistance
・Excellent electrical characteristics (CTI)
・Snap fit stability
Connector
For wiring electrical and electronic components
Products LEONA™
Connector
For wiring electrical and electronic components
Products
Grades
SN series
FR series
FG series
・ SN series: GF reinforced non-halogenated flame retardancy
・ FR series: non reinforced flame retardancy
・ FG series: GF reinforced non flame retardancy
Features
・Laser printability
・Moldability
・Strength, toughness
・Electrical characteristics (CTI)
・Heat resistance
Inverter cover
Covers of various electrical equipments
Products XYRON™
Inverter cover
Covers of various electrical equipments
Products
Grades
240Z、440Z
・Non-reinforced and flame retardant grades
・Excellent electrical characteristics and flame retardancy
・Hydrolysis resistance
Features
・Material with design flexibility suitable for outer chassis and interior chassis.
・UL flame-retardant 5VA acquisition and low specific gravity that contribute to product miniaturization and weight reduction.
・Heat resistance
・Acid and alkali resistance.
Cash dispenser
Chassis, internal chassis, conductive mechanism parts
Products XYRON™
Cash dispenser
Chassis, internal chassis, conductive mechanism parts
Products
Grades
X8610
・ Gives conductivity
・ Excellent mechanical properties (strength / rigidity)
・ High heat resistance
Features
・A material with a high degree of freedom in design suitable for chassis, internal chassis, and conductive mechanism parts.
・Since it suppresses the generation of static electricity, it is a suitable material for energized parts.
Solar cell junction box
The box shape parts that houses a diode of a solar panel
Products XYRON™
Solar cell junction box
The box shape parts that houses a diode of a solar panel
Products
Grades
540Z 644Z PV41Z
・Tracking resistance
・Hydrolysis resistance
・Acid and alkaline resistance
・Small dimensional change under high temperature and high humidity
Features
・Excellent heat resistance, rigidity, and low water absorption.
・Small dimensional change under high temperature and high humidity
solar cell connecter
Connector between cable and junction box of solar cell. As Asahi Kasei Group Environmental Contribut...
Products XYRON™
solar cell connecter
Connector between cable and junction box of solar cell.
As Asahi Kasei Group Environmental Contribution Products, this product contributes to the reduction of CO2 emissions at the stage of use.
Products
Grades
PV40Z
・Tracking resistance
・Hydrolysis resistance
・Acid and alkaline resistance
・Long-term stability of physical properties
Features
・Excellent balance between tracking resistance and low temperature impact strength.
・Enable to design compact high voltage compatible connector.
・It has excellent hydrolysis and ammonia resistance, and does not cause an extreme deterioration of physical properties even under a high temperature and high humidity.
Solar cell connector nut
Waterproof / dustproof nut for the moated part of the cable and connector
Products LEONA™
Gear box / Gear reducer
A speed changer that decelerates the speed obtained by the motor to generate the necessary force
Products LEONA™
Gear box / Gear reducer
A speed changer that decelerates the speed obtained by the motor to generate the necessary force
Products
Grades
・Under development（Filler reinforcement)
・Well balanced friction& wear resistance together with High fatigue resistance performance of PA66
Features
・Friction& wear resistance
・High modulus
・Good fatigue resistance
Solenoid valve
Controls the opening and closing of the flow in a pipe that allows fluid and gas to pass through by ...
Products LEONA™
Solenoid valve
Controls the opening and closing of the flow in a pipe that allows fluid and gas to pass through by air pressure, pneumatic pressure, water pressure, etc.
Products
Grades
SH10E
A grade providing high rigidity as well as UL94:V-0 (1.5 mm)
Features
・High stiffness and flame retardancy V-0
・Improved deformation/fracture resistance at bolt tightening
・No annealing required
Fan impeller for high speed fan motor
Cooling fan for servers, personal computers and other equipment
Products XYRON™
Fan impeller for high speed fan motor
Cooling fan for servers, personal computers and other equipment
Products
Features
・Since our materials have low specific gravity, they will help achieve weight reduction and contribute to high rotation.
・Low dimensional change due to low water absorption characterestic.
・Small deformation under high temperature due to high heat resistance.
・Suitable for high-speed fans and processed components that require strength.
・Can achieve cost reduction by using our materials to make components lighter and smaller.
PIM : Powder Injection Molding
PIM is a method of manufacturing small, high-precision metal and ceramic parts by adding a binder to...
Products TENAC™
PIM : Powder Injection Molding
PIM is a method of manufacturing small, high-precision metal and ceramic parts by adding a binder to metal or ceramic powder and injection molding, followed by degreasing and sintering.
Products
Grades
・Super high flowability grades: Tenac™ FF520, Tenac™ 9520
・We have developed innovative polyacetal resins to utilize as a binder.
・It is available to markets as a Super high flowability grade.
Features
・Excellent extrudability and thermal stability of metal or ceramic powder and binder mixtures (feedstock)
・Excellent feedstock formability
・Excellent strength of feedstock molding