Application cases

Homes and offices

Gearboxes are used in automatic opening and closing mechanisms for home appliances, housing equipment, automobiles, etc.
It incorporates gears and is connected to a motor. Good laser weldability, good appearance, and high strength are required for design, space saving, and miniaturization.

A device built into the inside of an ATM, this conductive mechanical component is used when withdrawing cash.
When banknotes slide and become charged, they stick to each other. The conductive resin removes static electricity and allows accurate counting of banknotes.

Cases, caps, valves, and other parts related to water purification systems.
They must be able to withstand water pressure, hot water, etc., and comply with the standards of the country of use.

Warm water tank for warm water toilet seat

A case to protect a water meter that counts the amount of drinking water used from external damage.
Resistance to water pressure, various chemicals, etc. is required.

Internal parts of equipment such as faucets and showers that mix hot and cold water to supply water of appropriate temperature.
They must be able to withstand water pressure, hot water, various chemicals, etc., and comply with the standards of the country in which they are used.

Damper for opening and closing toilet lids.
As a replacement of metal shaft parts, they are required to be rust-free, cost-effective, and strong after chemical exposure .

Thermal insulation materials are used as an energy-saving measure to reduce electricity bills and be environmentally friendly. The materials used must be able to withstand harsh environments such as high temperatures and humidity.

In air conditioning equipment, the switch to low GWP refrigerants is underway, but many of these are highly flammable and safety is an issue.

In refrigeration and freezing equipment, the switch to low GWP refrigerants is underway, but many of these refrigerants are highly flammable, posing safety issues.

Mechanical parts that holds and fixes capsules of coffee makers.
High rigidity is required to hold the capsule in place during coffee extraction, and good appearance is required to be visible to the public.

A part that serves as a lock to be attached to a window or sash.
As a metal substitute, it is required to have high strength, rigidity, and good appearance.

Door rollers used to open and close sashes, cabinets, etc. smoothly.
A part that is constantly loaded and slides against metal.

レーザービームプリンター（LBP）、インクジェットプリンター（IJP）等、プリンターの機構部品の透明部分。
可視性と、レーザー溶着が可能であることが求められる。

レーザービームプリンター（LBP）、インクジェットプリンター（IJP）等、プリンターの機構部品のカバー。
機構部品から発生する音を低減するための静音性が求められる。

A part that transmits torque and rotational accuracy by rotating a gear with meshing teeth around a shaft.
Durability and sliding properties are required.

Laser beam printers (LBP), inkjet printers (IJP), etc. Printer housings, chassis, and mechanical parts.
High dimensional precision, flame resistance, heat resistance, etc. are required.

Mechanical parts used in printers, such as shafts, bearings, arms, rollers, and cams.
Long-term durability, sliding properties, wear resistance, etc. are required.

Electrical contact parts and grounding parts. Substitution of metal by conductive resin.
The shape flexibility unique to resin eliminates secondary processing, leading to improved productivity and cost reductions.