Excellent heat resistance, strength and stiffness
Polyamide Resin

Overview and Features
Leona Leona

What is LEONA™?

レオナ™は、旭化成のポリアミド (PA、ナイロン)樹脂です。

PAは、化学名であるポリアミド(polyamide)の略称で、ナイロン(Nylon)樹脂とも呼ばれます。ポリアミド樹脂は、耐熱性、機械的強度に優れるエンジニアリングプラスチック(エンプラ)で、結晶性の熱可塑性樹脂です。

旭化成は、ポリアミドの中でも主にポリアミド66樹脂を製造・販売しています。アクリロニトリル・アジポニトリル・ヘキサメチレンジアミンやアジピン酸といった原料から、ポリアミドポリマーまでを一貫生産しています。

各種産業・用途に向けた幅広いグレードをご用意し、ポリアミド66樹脂のアジアNo.1メーカー*・日系自動車を中心とした日本市場No.1メーカー*としてお客様のニーズにお応えします。

*出典:富士経済「2023年エンプラ市場の展望とグローバル戦略」より、世界市場販売量、日本市場販売量を基に。

Leona

Key Features of LEONA™

ポリアミド樹脂 レオナ™は、耐熱性、機械的強度に優れる 「エンジニアリングプラスチック (エンプラ)」 であり、エンプラの中でも「結晶性」の「熱可塑性樹脂」に分類されます。

プラスチックの分類とポリアミド樹脂レオナ™の位置付け

ポリアミド樹脂 レオナ™は、様々な種類のポリアミドとフィラー・各種添加剤のかけ合わせにより、幅広いグレードを取り揃えています。以下では、標準となるポリアミド66樹脂の特徴をご紹介します。

Heat resistance

ポリアミド66樹脂 レオナ™は、エンジニアリングプラスチックの中では高い融点(265℃)を有し、耐熱性に優れた樹脂です。

結晶性樹脂と非晶性樹脂の違い
結晶性樹脂と非晶性樹脂の違い
結晶性樹脂の融点の比較
結晶性樹脂の融点の比較

機械的性質

ポリアミド66樹脂 レオナ™は、強度に優れた材料です。 高い靭性を有しており、耐衝撃性にも優れています。ポリアミド66の高分子鎖は緻密に集まっており分子間で水素結合が有効に作用することや、吸水時において可塑効果(水分子が非晶部に配位すること)が発現することに起因する性質です。

このような特徴から、高い強度・靭性が求められる金属代替材料としても適用されています。

ポリアミド66樹脂における水素結合と吸水時における水分子配位の様子
ポリアミド66樹脂における水素結合と吸水時における水分子配位の様子

Electrical insulation

ポリアミド66樹脂 レオナ™は、絶縁耐力・耐トラッキング性に優れた材料です。 これは、分子中にベンゼン環を持たず炭化しにくいことに起因しています。

結晶性樹脂(GF30%強化系)における絶縁耐力の比較
結晶性樹脂(GF30%強化系)における絶縁耐力の比較

耐油性・耐有機溶剤性

ポリアミド66樹脂 レオナ™は、酸を除く化学薬品、有機溶剤、潤滑油等に対する優れた耐性を有します。

ポリアミド66樹脂レオナ™の耐薬品性
ポリアミド66樹脂レオナ™の耐薬品性(当社調べをもとに、優良可不可を判別)

充填剤(フィラー)による高強度化

ポリアミド66樹脂 レオナ™は、分子間の引き合う力(凝集力)が高く、充填材 (フィラー)を配合しても脆くなりにくい性質があります。

凝集力を、凝集エネルギーをモル体積で除した凝集エネルギー密度とし、ポリマー間の比較を行うと、ポリアミドの凝集エネルギー密度が他ポリマーと比べて非常に高いことがわかります(図参照)。

プラスチックは、材料強度の向上等のためにガラス繊維(GF)、無機フィラー等の強化材・充填材を添加(コンパウンド)して使用されることが多いですが、添加量が多いと脆くなり、強度や耐衝撃性の低下を引き起こすことがあります。そのため、プラスチックへの強化材の添加量には上限値があり、プラスチックの種類によって、上限値が異なります。

ポリアミド66樹脂は前述の通り、高い凝集エネルギー密度を有するため、フィラーを高充填化して強化した場合においても脆くなりにくく、より多くの強化材を含有でき、各性能が発現しやすい性質を持ちます。

各ポリマー(非強化)の凝集エネルギー密度 (荒木 祥文(2018) 『工業材料』日刊工業新聞社 より作成)
各ポリマー(非強化)の凝集エネルギー密度(荒木 祥文 (2018)『工業材料』日刊工業新聞社 より作成)

レオナ™が選ばれる理由

01

Fully in-house production—from raw ingredients to finished products—ensures stable supply 

旭化成は、ポリアミド66樹脂をアジアで唯一、原料から一貫生産しています。世界的にも数少ない自社生産アジポニトリルを基にしたヘキサメチレンジアミンと、旭化成の独自手法 (シクロヘキセン法) により得られるシクロヘキサノールを基に生産したアジピン酸を原料としてポリアミド66樹脂 レオナ™を一貫生産することで、外部的要因での供給不安が比較的少ない供給体制を構築しています。

ポリアミド樹脂レオナ™における原料から樹脂までの製造フロー
ポリアミド66樹脂レオナ™における原料から樹脂までの製造フロー
02

ポリアミド66樹脂 日系No.1メーカー*、
豊富なグレードラインナップ

ポリアミド66樹脂のアジアNo.1メーカー*・日系自動車を中心とした日本市場No.1メーカー*として、長年培った知見を活かし、自動車産業をはじめとする各種産業・用途に向けたグレードの開発を行い、お客様のニーズに合わせた豊富なグレードラインナップを展開しています。日本市場シェアはNo.1*であり、全体の37%を占めています。

*出典:富士経済「2023年エンプラ市場の展望とグローバル戦略」より、世界市場販売量、日本市場販売量を基に。

03

技術サポート

世界各国に拠点を設けており、グローバルにお客様をサポートいたします。
さらに、設計シミュレーション技術である「樹脂CAE技術」により、お客様の製品設計・開発をサポートいたします。

技術サポートについての詳細はこちら

旭化成エンプラのテクニカルサポート

Applications

leona automotive leona E&E
Automotive 
LEONA™ products have been selected as materials for a vast array of automotive components by automotive OEMs around the world. The excellent heat resistance and mechanical properties of LEONA™ resins have led to these materials being adopted for products including: cylinder head covers to prevent spattering of engine oil; brackets and mounting components used to install vibration-reduction devices for engine units; guides for engine timing chains and cases to prevent oil spattering; oil pumps for engine brakes and other vehicle components; cooling pumps and pipes for batteries and other vehicle subsystems; bases and retention brackets for door mirrors; and smart-key housings. In recent years, Asahi Kasei has supported the transition to electric vehicles by stepping up proposals for resin products to serve as end plates for lithium-ion battery modules and components in various types of thermal-management systems.
Electrical and electronic
難燃性、耐トラッキング性、レーザー印字性等に優れたグレードをご提供しており、コネクタやマグネットスイッチ、モーターエンドキャップ、太陽電池のコネクタナットなどで採用実績がございます。次世代通信向けとして、スマートフォンシャーシ向けにも各種材料をご提案しています。
幅広い用途での使用が可能
耐疲労性や良外観性等から、温水便座用タンク、水道メーターケース、窓・サッシ等に取り付けるクレセントなどの住宅設備や、ソレノイドバルブ、減速機といった産業機械関連の事例もあり、幅広い用途での使用が可能です。樹脂CAE技術を用いた金属代替もご提案いたします。

Grade Proposal

ポリアミド樹脂レオナ™では、様々な種類のポリアミドとフィラー・各種添加剤のかけ合わせによる、幅広いグレードラインナップを取り揃えています。

標準となるPA66系においては、標準、耐熱、ガラス繊維 (GF) 強化、低反り・低摩耗、耐衝撃、高粘度・耐疲労、摺動、難燃グレード等をご提供しています。

PA66系以外では、半芳香族ポリアミド6Iとの共重合体PA66/6Iやポリマーアロイ66+6Iをベースに用いたグレード、低吸水性のPA612および低吸水性かつ植物由来原料を用いたPA610をベースに用いたグレードをラインナップしています。

新規開発材料として、ハロゲンと赤リンを含まない難燃剤を使用し、良外観性・吸水時高強度等に優れたPA66+6I難燃グレードレオナ™SNシリーズや無塗装外装向けに高外観・良成形加工性・強度に優れるPA6+6Iグレードレオナ™SUシリーズがございます。また、EVの冷却配管・パイプ・チューブへ適用可能な押出グレード等の開発を進めています。

grade-list

Product Data/Tips for Use *Handling Precautions

Precautions for handling LEONA™

The content of this document is based on materials, information, and data available at this time, and may be revised based on new findings. Please note that these are provided as information and are not guaranteed. Therefore, when using our products, please take full consideration of the usage environment, design, etc., and use them at your own risk after judging that there is no problem with the product.

1.取扱い上の注意

The following items are the main points of care for handling the LEONA™ itself supplied to your company. Please use it for safe handling of LEONA™.
A separate material safety data sheet has been prepared for handling precautions for LEONA™. Please contact us and we will send it to you. We request that your company investigate the safety of additives, etc. that your company uses other than LEONA™.

(1) Precautions for safety and health
Care should be taken to avoid contact with the eyes, skin, and inhalation of gases generated when LEONA™ dries or melts. Also, avoid direct contact with hot resin. It is recommended to install a local exhaust system and wear protective equipment (protective glasses, protective gloves, etc.) for each work such as drying and melting.

(2) Precautions regarding combustion
LEONA™ is flammable and should be handled and stored away from heat and sources of ignition. If it burns, it may generate toxic or suffocating gas. Extinguishing can be done with water, foam or dry chemical.

(3) Notes on disposal
LEONA™ can be disposed of by incineration or landfill, but when disposing of it, please entrust it to an authorized industrial waste disposal company or local public body in accordance with the "Waste Disposal and Public Cleansing Law". Also, when incinerating by yourself, please use incineration equipment and follow laws and ordinances such as the Air Pollution Control Law. When incinerated, toxic gases such as carbon monoxide and suffocating gases may be generated.

(4) Notes on storage
Absolutely avoid resin contamination and moisture absorption. Store in a cool, dry place and start molding immediately after opening. Do not pierce the product bag or let it get wet. Also, do not return spilled resin to the product bag. It is a combustible material (synthetic resins) designated by the Fire Service Act, and should be handled in accordance with municipal ordinances. (Fire extinguishing facility, indoor storage facility, etc.)

(5) Notes on molding
The optimum resin temperature for molding LEONA™ is 270 to 310°C. If it is lower than this, there is a risk of local degradation of physical properties due to non-uniform plasticization. On the other hand, if it is higher than this, there is a risk of gas generation due to decomposition or poor appearance such as silver. However, there are some exceptions such as FR200 and FR370, so be sure to refer to individual catalogs before molding. Also, do not allow LEONA™ to stay in the molding machine cylinder for a long time in a molten state. Doing so may cause the resin to decompose, resulting in discoloration or deterioration of the molded product. In that case, once replace the inside of the cylinder with polyethylene, etc., and then perform molding.

2.用途に関して

  • ・Do not use LEONA™ for embedding in the body or for direct contact with bodily fluids or infusion fluids.
  • ・When using for other medical purposes, please be sure to contact us in advance.
  • ・Do not use for applications that come into contact with food, such as food packaging containers.
  • ・Please contact us for details.
  • ・If you are considering using our products for other special purposes, please contact us and we will discuss them individually.
  • ・Please contact our person in charge for details on the compatibility of each grade with the Electrical Appliance and Material Control Law, UL standards, CSA standards, etc.

3.その他

Please be aware of industrial property rights when using this product.

Please contact us to ask any questions, discuss any concerns, and request samples.

PPEの説明を入力